..one stop store for your needs
delivering trust

Tipping Bucket Rain Guage

Product Code:12054

Tipping bucket rain gauge provides a reliable low-cost rain measurement sensor. It has an inner funnel to even the flow of the railfall into the gauge, providing better accuracy at higher rainfall rates. Its simplicity of design assures trouble-free opertaion , yet provide accurate rainfall measurement.

Key Features

Measuring Range: 0~4 mm/min
Resolution: 0.2 mm/ 0.5 mm
Inner Dia: 200 mm
Output: Reed Switch

e-Health Sensor Platform Kit

Product Code:12059

e-Health Sensor Platform Complete Kit allows to get a complete First Aid Kit for Makers. It allows users to perform biometric and medical applications where body monitoring is needed by using 9 different sensors

Key Features

e-Health Sensor Shield for Arduino and Raspberry Pi
Pulse and oxygen in blood sensor, Air Flow(Breathing Sensor
ECG, EMG & Glucometer Sensor
GSR - sweating sensor, Blood pressure sensor
Body temperature & position sensor


Pre-wired Strain gages

Product Code:12060

Prewired Linear,Foil strain gage for easier installations for embedded measuring grid

Key Features

No Soldering at the Measuring Point
Rugged Polyimide Carrier
Fully Encapsulated Gages for Protection from the Environment
? 120 or 350
0.3 mm grid, 2-leads, 1 m long

Pre-wired Strain gages

Product Code:12061

Prewired Linear,Foil strain gage for easier installations for embedded measuring grid

Key Features

No Soldering at the Measuring Point
Rugged Polyimide Carrier
Fully Encapsulated Gages for Protection from the Environment
? 120
0.6 mm grid, 2-leads, 1 m long

High Precision Inclinometer

Product Code:12062

It is an exciting instrument for indoor and outdoor work requiring precision and rugged durability. It is excellent for continuous monitoring of structural behavior, or short-term testing of machine and structural performance.

Key Features

Angular Range: +/- 3 degees to +/-50 degrees
Resolution of 0.0001 deg
Digital Output
DC Powered
Wide operating temperature range


Water Level Sensor, Vertical

Product Code:12013

The operation of these liquid level sensors is based on the status of a switch which can be opened and closed (depending on its placing in the container) as the level of liquid moves the float at its end

Key Features

Measurement Level: Vertical
Liquids: Water
Material (box): Propylene
Material (float): Propylene
Operating Temperature: -10ºC ~ +80ºC

Presence Sensor(PIR)

Product Code:12014

The PIR sensor (Passive Infra-Red) is a pyroelectric sensor mainly consisting of an infrared receiver and a focusing lens that bases its operation on the monitoring of the variations in the levels of reception of detected infra-reds, reflecting this movement by setting its output signal high

Key Features

Height: 25.4mm Width: 24.3mm Length: 28.0mm
Consumption: 100μA
Range of detection: 6 ~ 7m
Spectral range: ~ 10μm

Hall Effect Sensor

Product Code:12015

This is a magnetic sensor based on the Hall effect. The sensor’s switch remains closed in the presence of a magnetic field, opening up in its absence. Together with its complementary magnet (P6250000) it can be used in applications of monitoring proximity or opening mechanisms

Key Features

Length: 32mm Width: 15mm Thickness: 7mm
Maximum contact resistance (closed): 150mΩ
Minimum contact resistance (open): 100GΩ


Water Leakage/Liquid detection Sensor(Point)

Product Code:12016

This sensor bases its operation on the variation in resistance between its two contacts in the presence of liquid to commute a switch reed from open to closed, commuting to open again when the liquid disappears (take care when it is used to detect liquids of high viscosity which may remain between the terminals blocking its drainage and preventing it from re-opening)..

Key Features

Maximum Switching Voltage: 100V
Operating temperature: +5ºC ~ +80ºC
Detectable liquids: Water


Liquid Flow Sensor

Product Code:12017

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 0.15 ~ 2.5L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 3900 pulses/liter
Inlet pipe size: 2mm Outlet pipe size: 4mm

Your Shopping Cart

Your Cart is empty