1.27mm Ejector Header,dip type

Product Code:14035



Key Features

Insulator Material: Polyester, Ul94v-0
Terminal Material: Copper Alloy
Finish: Gold Or Tin Plated
Current Rating: 1 Ampere
Dielectric Withstanding Voltage: 1000 V /1 Minute

2.00mm Pitch FD Connector,2pcs set

Product Code:14036



Key Features

Insulator Material: Polyester, Ul94v-0
Terminal Material: Copper Alloy
Finish: Gold Plated Over Nickel
Current Rating: 2 Ampere
Dielectric Withstanding Voltage: 500 V /1 Minute

Double layer 9 pin male D-sub connector

Product Code:14037



Key Features

Shell:Steel,Ni or Sn plated
Contact:Brass,selective gold plated
Rated current:1.0A
Rated Voltage:300V DC
Contact resistance:20m Ohms max

2*4 port right angle stacked RJ45 with led

Product Code:14038



Key Features

Shell:copper alloy
Contact:phosphor bronze,gold plated
Rated current:1.5A
Rated Voltage:125V DC
Durability:750 cycles

2.54mm pitch wire to wire connector

Product Code:14039



Key Features

Insulation material:PA66,UL94V-0
Terminal:brass
Plating:Tin plated over nickel
Current rating:3A
AWG:2 to 12

Fiber Optic Cable Assembly - Customized

Product Code:23023

Fiber Optic Cables we offer are RoHS compliant, and are guaranteed for high quality. The cables are comprehensively tested to make sure that the cables work securely and data transmission is reliable and stable in your network

Key Features

All type of connector options
Different types of Jacket options
Customized to Lengths as per requirements
Available in Simplex/Duplex Configurations

Fixed Fiber Optic Attenuators -Single

Product Code:23024

Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver.

Key Features

Available in various configurations
Precise & stable Attenuation values
Low PDL and insertion loss
Precisional reflection polishing

Variable Fiber optic Attenuators - Inline

Product Code:23025

Variable in-line optical attenuators comprises a dual fiber collimator and a reflection component separated by a linear moveable ND filter. They are used to permit dynamic control of optical power levels in a fiber and can be applied to adjust power level of signal in the optical communication at the output of light sources, E/O converters and for the linear or dynamic range of power meter.

Key Features

Wide attenuation range 0dB to 60dB
Low PDL and insertion loss
High stability & high reliability

Variable Rotary Attenuator, 0-11 dB

Product Code:17012

Variable Attenuator for use in-line in the test setup.

Key Features

DC-2.7 GHz, 2 or 5W option
Available step value:0dB, 1dB, 2dB, 3dB, 4dB, 5dB, 6dB, 7dB, 8dB, 9dB, 10dB, 11dB.
Impedance: 50 or 75 ohm
Operating up to 85 deg C
Ultra small size with innovative microstrip technology

Fixed & Attenuator, 30 dB

Product Code:17013

Fixed Attenuator for use in-line in the test setup.

Key Features

DC-3 GHz
25W Power handling capacity
Op. temp: -55 to +125 deg C
Impedance: 50 ohm
Small VSWR