..one stop store for your needs
delivering trust

Water Level Sensor, Vertical

Product Code:12013

The operation of these liquid level sensors is based on the status of a switch which can be opened and closed (depending on its placing in the container) as the level of liquid moves the float at its end

Key Features

Measurement Level: Vertical
Liquids: Water
Material (box): Propylene
Material (float): Propylene
Operating Temperature: -10ºC ~ +80ºC

Presence Sensor(PIR)

Product Code:12014

The PIR sensor (Passive Infra-Red) is a pyroelectric sensor mainly consisting of an infrared receiver and a focusing lens that bases its operation on the monitoring of the variations in the levels of reception of detected infra-reds, reflecting this movement by setting its output signal high

Key Features

Height: 25.4mm Width: 24.3mm Length: 28.0mm
Consumption: 100μA
Range of detection: 6 ~ 7m
Spectral range: ~ 10μm

Hall Effect Sensor

Product Code:12015

This is a magnetic sensor based on the Hall effect. The sensor’s switch remains closed in the presence of a magnetic field, opening up in its absence. Together with its complementary magnet (P6250000) it can be used in applications of monitoring proximity or opening mechanisms

Key Features

Length: 32mm Width: 15mm Thickness: 7mm
Maximum contact resistance (closed): 150mΩ
Minimum contact resistance (open): 100GΩ


Water Leakage/Liquid detection Sensor(Point)

Product Code:12016

This sensor bases its operation on the variation in resistance between its two contacts in the presence of liquid to commute a switch reed from open to closed, commuting to open again when the liquid disappears (take care when it is used to detect liquids of high viscosity which may remain between the terminals blocking its drainage and preventing it from re-opening)..

Key Features

Maximum Switching Voltage: 100V
Operating temperature: +5ºC ~ +80ºC
Detectable liquids: Water


Liquid Flow Sensor

Product Code:12017

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 0.15 ~ 2.5L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 3900 pulses/liter
Inlet pipe size: 2mm Outlet pipe size: 4mm

Liquid Flow Sensor,0.5 ~ 25L/Min

Product Code:12018

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 0.5 ~ 25L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 450 pulses/liter
Pipe connection: ½’’

Liquid Flow Sensor, 1 ~ 60L/Min

Product Code:12019

The liquid flow sensors output a signal that consists of a series of digital pulses whose frequency is proportional to the flow rate of the liquid through the sensor.

Key Features

Flow rate: 1 ~ 60L/Min
Working voltage: +3.3V ~ +24V
Working temperature: -10ºC ~ 120ºC
Pulse number: 390 pulses/liter
Pipe connection: 1’’

Atmospheric Pressure Sensor

Product Code:12020

The sensor is an analog sensor which outputs voltage proportional to the atmospheric pressure.

Key Features

Measurement range: 15 ~ 115kPa
Output signal: 0.2 ~ 4.8V (0 ~ 85ºC)
Sensitivity: 46mV/kPa
Accuracy: <±1.5%V (0 ~ 85ºC)
Response time: 20ms

Water Leakage/Liquid detection Sensor(Line)

Product Code:12021



Key Features

Length: 5 meters sensor + 2 meters jumper wire
Material: PE & alloy lend
Pull force limit: 60kg
Core resistance: 3ohm/100meters
Detectable liquids: Water

Stretch Sensor

Product Code:12022

This is a resistive sensor whose conductivity drops when it is stretched lengthwise, regaining its original resistance once returned to rest, so it is useful in applications such as monitoring of force or variations of distances

Key Features

Resistance of the sensor at rest: 1kΩ per inch
Length: 4 inches (10.16cm)
Resistance of the sensor in tension (50% stretch):Approximately 2kΩ per inch


Your Shopping Cart

Your Cart is empty